The following press release was issued today by Ametherm.
New Ametherm Thermistor Delivers Industry-High 680 V Voltage Rating for Welding Equipment and Plasma Cutters
CARSON CITY, Nev. — July 29, 2015 — Ametherm today announced a new PTC circuit protection thermistor with an industry-high voltage rating for inrush current limiting and overcurrent protection in applications such as welding equipment and plasma cutters with extremely high voltages from 480 V to 930 V.
The new MCL20 500100-A thermistor released today features a 680 V voltage rating and handles a maximum inrush current of 20 A at maximum peak voltage. The device offers resistance at 25 °C of 50 Ω with a tolerance of 20 %, a dissipation constant of 55.0 mW/°C, a heat capacity of 5.45 J/°C, and a thermal constant of 62 s. The thermistor operates over a wide temperature range of -50 °C to +150 °C.
The radial-leaded MCL20 500100-A offers easy PCB mounting. With a 19 mm diameter, 9 mm maximum profile, and 7.8 mm lead spacing, the thermistor provides designers with a more compact and cost-effective alternative to combining a power resistor, relay, and timer on one circuit to achieve the same functionality. The RoHS-compliant device is available with straight leads and outside or inside kinked leads.
“The MCL20 500100-A can withstand hundreds of hits of maximum inrush current without degrading,” said Eric Rauch, president and CEO at Ametherm. “The device offers a short reset time, and as a PTC thermistor a quick reset will not result in a large inrush current, as its resistance is already at a high state. The result is extremely high reliability and stability in high-voltage applications, all while saving board space.”
The MCL20 500100-A PTC thermistor is available direct or through distributors such as Mouser. Samples and production quantities of the device are available now, with factory lead times of seven weeks. Volume pricing for U.S. delivery starts at $2.60 per piece in 1,000-piece quantities.
For more information on Ametherm’s products or to request a sample, visit www.ametherm.com. Or call 800-808-2434 (toll free in the United States) or 775-884-2434 from outside the U.S. and Canada.
# # #
About Ametherm
Ametherm, headquartered in Carson City, Nevada, was founded in 1994 and specializes in inrush current limiting power thermistors for circuit protection in the power market industry. Ametherm’s devices are some of the highest rated in the industry and provide the widest range of inrush current protection available. For more information, visit www.ametherm.com or call 800-808-2434.
Link to datasheet: https://www.ametherm.com/datasheetspdf/MCL20500100A.pdf
Link to product photo: http://www.redpinesgroup.com/Ametherm/AmethermMCL20.jpg
Agency Contact: Ametherm Contact:
Bob Decker Lori Morton
Redpines Ametherm
+1 415 409 0233 +1 775 884 2434
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.
ENDS